A Guide to Tree Removal Tree removal is a difficult task and it is not as simple as cutting its trunk. This is for the simple reasons that most trees are not straight trees which you can simply cut and dig up. During a storm, there will be big trees that will be damaged or big trees can be block your access to a place, or there are just not in the right place to be and it is creating a great nuisance where they are. If you are going to fell a tree, it is important to check the surrounding area first. A professional tree removal service should do the job if you observe that power lines are near the area, or if you live near a cliff or on top of a hill. You can do the tree cutting yourself if the area surrounding it is clear, and if you are on flat ground. Tree removal is time consuming and needs the proper tools and anyone who decides to cut a tree himself should always remember this. You will also need two escape routes on both sides of the tree that you will use later on. If you will cut your own tree, then you should do the undercut first. The tree will fall according to this guide. A V shaped notched should be cut in on the side where you want to tree to fall. The angle of the cut should be 90 degrees and the length should be one fourth of its diameter.
Getting To The Point – Experts
The second cut is the backcut. The undercut has a hinge part and the backcut should be cut two inches higher than that. This should be done on the opposite side of the trunk, the side you don’t want it to fall on. This cut helps to release the stress on the tree and it helps the tree to fall easily.
What Do You Know About Professionals
You should get yourself out of the way, to the escape routes you have established when you see the tree starting to fall. You should resume working only when the tree is safely on the ground. The next part of tree cutting is limbing. Here you start taking out the branches from the bottom up. You should be on the opposite of the trunk from the branch you are cutting. Tree trunks are usually stored for firewood and so you should start cutting it according to the desired lengths. If you want to deliver the branches for recycling, you should cut them to the required size according to your bylaws and bundle them up for pickup. Let the professionals remove the stump. There is still a lot of tree under the ground that we can’t see. You can call your tree removal services which offer professional tree removal , tree trimming, stump grinding, and other services.