Tips On How To Paint The Home Exterior Painting the home exterior can cost a lot of money when a painting contractor is hired but if the person wants to save money if they invest time to do the exterior painting for themselves. A great paint job can last a whole decade but the key is proper preparation and by following the tips shown below the person can do a great painting job that will serve the home for years to come. People that paint the home by themselves are not compelled by the law to use lead-free practices like the way professional paint contractors must adhere to but if the house was built before the year 1978 which is the year that lead paint was banned for residential use then the painter has an obligation to protect themselves and the neighbour from any airborne lead particles. The primary step is to test for lead paint using lead testing kits that can be bought for $10-35 dollars online and at any paint and hardware stores if the tests test positive for lead then the person needs to keep the dust to a small level by taking some precautions. Some of the precautions include the following: laying plastic drop cloths, collecting the scrapings, cleaning the area with a HEPA vacuum, wearing masks and Tyvek suits and disposing all the material at an approved hazardous material site. It is good to note that the painter needs to wash the exterior because mildew thrives under the fresh paint that will not adhere well to the dirty, spore sporting, and grimy exterior walls thus the person needs to wash the exterior of the house before the painting. It is good to note that the person should use a mix of water and phosphate-free cleanser and they can hand apply the solution with a sponge that will take a lot of time, or they can hire a professional to pressure wash the wall which is not an amateur task that can damage siding by pushing water under the boards.
The Path To Finding Better Professionals
After the clapboards dried off, the person needs to remove the loose flaking paint, and a handheld scraper is the best tool for the job. The person may use a hot-air gun or infrared paint stripper, but the person should not use an open-flame torch because it can burn the clapboards and use it is illegal in most states. Just to be lead-safe the person needs to wear a mask and a Tyvek suit, spray water over the paint as they scrape and collect the debris after removing it. A pad sander or a random orbit fitted with an 80-grit sandpaper can smooth out any rough spots that remain, but they should take care not to push so hard that they leave marks on the wood.Learning The “Secrets” of Services